SCHAKO DSCP Curved Slot Diffuser for Plasterboard Ceilings

SCHAKO DSCP Curved Slot Diffuser for Plasterboard Ceilings is suitable for use in rooms from 2.6 m to 4 m high for direct installation in plasterboard ceilings or ceiling cavities (pressure ceilings). The special shape of the frame profile allows good installation in the plasterboard ceiling. As standard, the profiles are prepared ex-factory with screw bores to enable them to be screw-mounted easily to the plasterboard ceiling. There is also the option of mounting them with a clamping bracket. Airflow to the slot outlet is through a compression ceiling or through connection boxes above the GRP ceiling specifically designed for PLASTER outlets. The air deflection blades adjustable from below allow a variety of throw adjustment options. Thus, the air throw pattern can be adjusted from a vertical throw in heating mode to a horizontal throw in cooling mode. In cooling mode, a one- or two-way air throw pattern can be set. A one-way air throw pattern in "outside" direction is preferred. The blades produce a stable air jet and achieve very high induction. The slot diffuser can be manufactured as 1 or 2–slot model and is available either as a single piece or in band design. In addition, it can be combined with the DSCP slot diffuser. The large free cross-section allows a greater volumetric flow in the DSCP compared with other slot diffusers. Use in VVS installations provides efficiency from 100-40%. The stable air jet and high induction means that the DSCP slot diffuser can be used in cooling mode up to ΔT0 ≤ -8 K.